INVAMAT Automobile Scotch Tape
INVAMAT automobile scotch tape — heat-resistant tape.
Basic substance — crepe paper
Adhesive — natural rubber
Size: 55 mm x 50 m
Application:
INVAMAT automobile adhesive tape is designed to solve a wide range of tasks: painting and bodywork, glass bonding, temporary fixation of parts and much more.
Application conditions:
Adhesive tape transported at temperatures below plus 5 °C before use must be kept at a temperature of 23 ± 2 °С within a day.
Adhesive tape shall be kept at least 3 hours before use at a temperature of 23 ± 2 °C and fixed without tension at the same temperature.
For best bonding, smooth the bonding area by hand or roller to squeeze air out from under the tape.
Tape operating temperature after gluing:80 °C for 30 minutes (60 °C for 1 hour).
Storage conditions:
Adhesive tape shall be stored in a dry, covered room excluding direct sunlight, at a temperature of at least 5 °C and not higher than 25 °C at a distance of at least 1 m from heaters.It is not allowed to store adhesive tape with organic solvents, flammable and combustible liquids, acids, chemicals and other aggressive environments.
Environmental safety:
Does not emit toxic substances into the environment and does not have a harmful effect on the human body through direct contact.
Service life: not established by the manufacturer.
Not subject to mandatory certification.
Specifications:
| Pos. No. | Parameters | Standard | Standard |
| 1 | Tape thickness, microns | 130±10% | 130 |
| 2 | Tape width, mm | 48 ± 1 | 48 |
| 3 | Tape length in a roll, m | 50 ± 2% | 49,0 |
| 4 | Tensile strength | 20 | ≥20 |
| 5 | Stickiness (sec.) | 300 | ≥300 |
| 6 | Adhesion to steel N/25t | 3,6 | ≥ 3,б |